autocmd.txt For Vim version 9.1. Last change: 2024 Oct 27
VIM REFERENCE MANUAL by Bram Moolenaar
Automatic commands autocommand autocommands
For a basic explanation, see section 40.3 in the user manual.
1. Introduction autocmd-intro
2. Defining autocommands autocmd-define
3. Removing autocommands autocmd-remove
4. Listing autocommands autocmd-list
5. Events autocmd-events
6. Patterns autocmd-patterns
7. Buffer-local autocommands autocmd-buflocal
8. Groups autocmd-groups
9. Executing autocommands autocmd-execute
10. Using autocommands autocmd-use
11. Disabling autocommands autocmd-disable
==============================================================================
1. Introduction autocmd-intro
You can specify commands to be executed automatically when reading or writing
a file, when entering or leaving a buffer or window, and when exiting Vim.
For example, you can create an autocommand to set the 'cindent' option for
files matching *.c. You can also use autocommands to implement advanced
features, such as editing compressed files (see gzip-example). The usual
place to put autocommands is in your .vimrc or .exrc file.
E203 E204 E143 E855 E937 E952
WARNING: Using autocommands is very powerful, and may lead to unexpected side
effects. Be careful not to destroy your text.
- It's a good idea to do some testing on an expendable copy of a file first.
For example: If you use autocommands to decompress a file when starting to
edit it, make sure that the autocommands for compressing when writing work
correctly.
- Be prepared for an error halfway through (e.g., disk full). Vim will mostly
be able to undo the changes to the buffer, but you may have to clean up the
changes to other files by hand (e.g., compress a file that has been
decompressed).
- If the BufRead* events allow you to edit a compressed file, the FileRead*
events should do the same (this makes recovery possible in some rare cases).
It's a good idea to use the same autocommands for the File* and Buf* events
when possible.
Recommended use:
- Always use a group, so that it's easy to delete the autocommand.
- Keep the command itself short, call a function to do more work.
- Make it so that the script it is defined in can be sourced several times
without the autocommand being repeated.
Example in Vim9 script:
autocmd_add([{replace: true,
group: 'DemoGroup',
event: 'BufEnter',
pattern: '*.txt',
cmd: 'call DemoBufEnter()'
}])
In legacy script:
call autocmd_add([#{replace: v:true,
\ group: 'DemoGroup',
\ event: 'BufEnter',
\ pattern: '*.txt',
\ cmd: 'call DemoBufEnter()'
\ }])
==============================================================================
2. Defining autocommands autocmd-define
:au :autocmd
:au[tocmd] [group] {event} {aupat} [++once] [++nested] {cmd}
Add {cmd} to the list of commands that Vim will
execute automatically on {event} for a file matching
{aupat} autocmd-patterns.
Here {event} cannot be "*". E1155
Note: A quote character is seen as argument to the
:autocmd and won't start a comment.
Vim always adds the {cmd} after existing autocommands,
so that the autocommands execute in the order in which
they were given.
See autocmd-nested for [++nested]. "nested"
(without the ++) can also be used, for backwards
compatibility, but not in Vim9 script. E1078
autocmd-once
If [++once] is supplied the command is executed once,
then removed ("one shot").
The special pattern <buffer> or <buffer=N> defines a buffer-local autocommand.
See autocmd-buflocal.
If the :autocmd is in Vim9 script (a script that starts with :vim9script
and in a :def function) then {cmd} will be executed as in Vim9
script. Thus this depends on where the autocmd is defined, not where it is
triggered.
:autocmd-block
{cmd} can be a block, like with :command, see :command-repl. Example:
au BufReadPost *.xml {
setlocal matchpairs+=<:>
/<start
}
The autocmd_add() function can be used to add a list of autocmds and autocmd
groups from a Vim script. It is preferred if you have anything that would
require using :execute with :autocmd.
Note: The ":autocmd" command can only be followed by another command when the
'|' appears where the pattern is expected. This works:
:augroup mine | au! BufRead | augroup END
But this sees "augroup" as part of the defined command:
:augroup mine | au! BufRead * | augroup END
:augroup mine | au BufRead * set tw=70 | augroup END
Instead you can put the group name into the command:
:au! mine BufRead *
:au mine BufRead * set tw=70
Or use :execute:
:augroup mine | exe "au! BufRead *" | augroup END
:augroup mine | exe "au BufRead * set tw=70" | augroup END
autocmd-expand
Note that special characters (e.g., "%", "<cword>") in the ":autocmd"
arguments are not expanded when the autocommand is defined. These will be
expanded when the Event is recognized, and the {cmd} is executed. The only
exception is that "<sfile>" is expanded when the autocmd is defined. Example:
:au BufNewFile,BufRead *.html so <sfile>:h/html.vim
Here Vim expands <sfile> to the name of the file containing this line.
:autocmd adds to the list of autocommands regardless of whether they are
already present. When your .vimrc file is sourced twice, the autocommands
will appear twice. To avoid this, define your autocommands in a group, so
that you can easily clear them:
augroup vimrc
" Remove all vimrc autocommands
autocmd!
au BufNewFile,BufRead *.html so <sfile>:h/html.vim
augroup END
If you don't want to remove all autocommands, you can instead use a variable
to ensure that Vim includes the autocommands only once:
:if !exists("autocommands_loaded")
: let autocommands_loaded = 1
: au ...
:endif
When the [group] argument is not given, Vim uses the current group (as defined
with ":augroup"); otherwise, Vim uses the group defined with [group]. Note
that [group] must have been defined before. You cannot define a new group
with ":au group ..."; use ":augroup" for that.
While testing autocommands, you might find the 'verbose' option to be useful:
:set verbose=9
This setting makes Vim echo the autocommands as it executes them.
When defining an autocommand in a script, it will be able to call functions
local to the script and use mappings local to the script. When the event is
triggered and the command executed, it will run in the context of the script
it was defined in. This matters if <SID> is used in a command.
When executing the commands, the message from one command overwrites a
previous message. This is different from when executing the commands
manually. Mostly the screen will not scroll up, thus there is no hit-enter
prompt. When one command outputs two messages this can happen anyway.
==============================================================================
3. Removing autocommands autocmd-remove
In addition to the below described commands, the autocmd_delete() function can
be used to remove a list of autocmds and autocmd groups from a Vim script.
:au[tocmd]! [group] {event} {aupat} [++once] [++nested] {cmd}
Remove all autocommands associated with {event} and
{aupat}, and add the command {cmd}.
See autocmd-once for [++once].
See autocmd-nested for [++nested].
:au[tocmd]! [group] {event} {aupat}
Remove all autocommands associated with {event} and
{aupat}.
:au[tocmd]! [group] * {aupat}
Remove all autocommands associated with {aupat} for
all events.
:au[tocmd]! [group] {event}
Remove ALL autocommands for {event}.
Warning: You should not do this without a group for
BufRead and other common events, it can break
plugins, syntax highlighting, etc.
:au[tocmd]! [group] Remove ALL autocommands.
Note: a quote will be seen as argument to the :autocmd
and won't start a comment.
Warning: You should normally not do this without a
group, it breaks plugins, syntax highlighting, etc.
When the [group] argument is not given, Vim uses the current group (as defined
with ":augroup"); otherwise, Vim uses the group defined with [group].
==============================================================================
4. Listing autocommands autocmd-list
:au[tocmd] [group] {event} {aupat}
Show the autocommands associated with {event} and
{aupat}.
:au[tocmd] [group] * {aupat}
Show the autocommands associated with {aupat} for all
events.
:au[tocmd] [group] {event}
Show all autocommands for {event}.
:au[tocmd] [group] Show all autocommands.
If you provide the [group] argument, Vim lists only the autocommands for
[group]; otherwise, Vim lists the autocommands for ALL groups. Note that this
argument behavior differs from that for defining and removing autocommands.
In order to list buffer-local autocommands, use a pattern in the form <buffer>
or <buffer=N>. See autocmd-buflocal.
The autocmd_get() function can be used from a Vim script to get a list of
autocmds.
:autocmd-verbose
When 'verbose' is non-zero, listing an autocommand will also display where it
was last defined. Example:
:verbose autocmd BufEnter
FileExplorer BufEnter
* call s:LocalBrowse(expand("<amatch>"))
Last set from /usr/share/vim/vim-7.0/plugin/NetrwPlugin.vim
See :verbose-cmd for more information.
==============================================================================
5. Events autocmd-events E215 E216
You can specify a comma-separated list of event names. No white space can be
used in this list. The command applies to all the events in the list.
For READING FILES there are four kinds of events possible:
BufNewFile starting to edit a non-existent file
BufReadPre BufReadPost starting to edit an existing file
FilterReadPre FilterReadPost read the temp file with filter output
FileReadPre FileReadPost any other file read
Vim uses only one of these four kinds when reading a file. The "Pre" and
"Post" events are both triggered, before and after reading the file.
Note that the autocommands for the *ReadPre events and all the Filter events
are not allowed to change the current buffer (you will get an error message if
this happens). This is to prevent the file to be read into the wrong buffer.
Note that the 'modified' flag is reset AFTER executing the BufReadPost
and BufNewFile autocommands. But when the 'modified' option was set by the
autocommands, this doesn't happen.
You can use the 'eventignore' option to ignore a number of events or all
events.
autocommand-events {event}
Vim recognizes the following events. Vim ignores the case of event names
(e.g., you can use "BUFread" or "bufread" instead of "BufRead").
First an overview by function with a short explanation. Then the list
alphabetically with full explanations autocmd-events-abc.
Name triggered by
Reading
BufNewFile starting to edit a file that doesn't exist
BufReadPre starting to edit a new buffer, before reading the file
BufRead starting to edit a new buffer, after reading the file
BufReadPost starting to edit a new buffer, after reading the file
BufReadCmd before starting to edit a new buffer Cmd-event
FileReadPre before reading a file with a ":read" command
FileReadPost after reading a file with a ":read" command
FileReadCmd before reading a file with a ":read" command Cmd-event
FilterReadPre before reading a file from a filter command
FilterReadPost after reading a file from a filter command
StdinReadPre before reading from stdin into the buffer
StdinReadPost After reading from the stdin into the buffer
Writing
BufWrite starting to write the whole buffer to a file
BufWritePre starting to write the whole buffer to a file
BufWritePost after writing the whole buffer to a file
BufWriteCmd before writing the whole buffer to a file Cmd-event
FileWritePre starting to write part of a buffer to a file
FileWritePost after writing part of a buffer to a file
FileWriteCmd before writing part of a buffer to a file Cmd-event
FileAppendPre starting to append to a file
FileAppendPost after appending to a file
FileAppendCmd before appending to a file Cmd-event
FilterWritePre starting to write a file for a filter command or diff
FilterWritePost after writing a file for a filter command or diff
Buffers
BufAdd just after adding a buffer to the buffer list
BufCreate just after adding a buffer to the buffer list
BufDelete before deleting a buffer from the buffer list
BufWipeout before completely deleting a buffer
BufFilePre before changing the name of the current buffer
BufFilePost after changing the name of the current buffer
BufEnter after entering a buffer
BufLeave before leaving to another buffer
BufWinEnter after a buffer is displayed in a window
BufWinLeave before a buffer is removed from a window
BufUnload before unloading a buffer
BufHidden just before a buffer becomes hidden
BufNew just after creating a new buffer
SwapExists detected an existing swap file
Options
FileType when the 'filetype' option has been set
Syntax when the 'syntax' option has been set
EncodingChanged after the 'encoding' option has been changed
TermChanged after the value of 'term' has changed
OptionSet after setting any option
Startup and exit
VimEnter after doing all the startup stuff
GUIEnter after starting the GUI successfully
GUIFailed after starting the GUI failed
TermResponse after the terminal response to t_RV is received
TermResponseAll after the terminal response to t_RV and others is received
QuitPre when using :quit, before deciding whether to exit
ExitPre when using a command that may make Vim exit
VimLeavePre before exiting Vim, before writing the viminfo file
VimLeave before exiting Vim, after writing the viminfo file
VimSuspend when suspending Vim
VimResume when Vim is resumed after being suspended
Terminal
TerminalOpen after a terminal buffer was created
TerminalWinOpen after a terminal buffer was created in a new window
Various
FileChangedShell Vim notices that a file changed since editing started
FileChangedShellPost After handling a file changed since editing started
FileChangedRO before making the first change to a read-only file
DiffUpdated after diffs have been updated
DirChangedPre before the working directory will change
DirChanged after the working directory has changed
ShellCmdPost after executing a shell command
ShellFilterPost after filtering with a shell command
CmdUndefined a user command is used but it isn't defined
FuncUndefined a user function is used but it isn't defined
SpellFileMissing a spell file is used but it can't be found
SourcePre before sourcing a Vim script
SourcePost after sourcing a Vim script
SourceCmd before sourcing a Vim script Cmd-event
VimResized after the Vim window size changed
FocusGained Vim got input focus
FocusLost Vim lost input focus
CursorHold the user doesn't press a key for a while
CursorHoldI the user doesn't press a key for a while in Insert mode
CursorMoved the cursor was moved in Normal mode
CursorMovedC the cursor was moved in the Command-line
CursorMovedI the cursor was moved in Insert mode
WinNewPre before creating a new window
WinNew after creating a new window
TabNew after creating a new tab page
WinClosed after closing a window
TabClosed after closing a tab page
WinEnter after entering another window
WinLeave before leaving a window
TabEnter after entering another tab page
TabLeave before leaving a tab page
CmdwinEnter after entering the command-line window
CmdwinLeave before leaving the command-line window
CmdlineChanged after a change was made to the command-line text
CmdlineEnter after the cursor moves to the command line
CmdlineLeave before the cursor leaves the command line
InsertEnter starting Insert mode
InsertChange when typing <Insert> while in Insert or Replace mode
InsertLeave when leaving Insert mode
InsertLeavePre just before leaving Insert mode
InsertCharPre when a character was typed in Insert mode, before
inserting it
ModeChanged after changing the mode
TextChanged after a change was made to the text in Normal mode
TextChangedI after a change was made to the text in Insert mode
when popup menu is not visible
TextChangedP after a change was made to the text in Insert mode
when popup menu visible
TextChangedT after a change was made to the text in Terminal mode
TextYankPost after text has been yanked or deleted
SafeState nothing pending, going to wait for the user to type a
character
SafeStateAgain repeated SafeState
ColorSchemePre before loading a color scheme
ColorScheme after loading a color scheme
RemoteReply a reply from a server Vim was received
QuickFixCmdPre before a quickfix command is run
QuickFixCmdPost after a quickfix command is run
SessionLoadPost after loading a session file
SessionWritePost after writing the session file using
the :mksession command
MenuPopup just before showing the popup menu
CompleteChanged after Insert mode completion menu changed
CompleteDonePre after Insert mode completion is done, before clearing
info
CompleteDone after Insert mode completion is done, after clearing
info
KeyInputPre just before a key is processed
User to be used in combination with ":doautocmd"
SigUSR1 after the SIGUSR1 signal has been detected
WinScrolled after scrolling or resizing a window
The alphabetical list of autocommand events: autocmd-events-abc
BufCreate BufAdd
BufAdd or BufCreate Just after creating a new buffer which is
added to the buffer list, or adding a buffer
to the buffer list.
Also used just after a buffer in the buffer
list has been renamed.
Not triggered for the initial buffers created
during startup.
The BufCreate event is for historic reasons.
NOTE: When this autocommand is executed, the
current buffer "%" may be different from the
buffer being created "<afile>".
BufDelete
BufDelete Before deleting a buffer from the buffer list.
The BufUnload may be called first (if the
buffer was loaded).
Also used just before a buffer in the buffer
list is renamed.
NOTE: When this autocommand is executed, the
current buffer "%" may be different from the
buffer being deleted "<afile>" and "<abuf>".
Don't change to another buffer, it will cause
problems.
BufEnter
BufEnter After entering a buffer. Useful for setting
options for a file type. Also executed when
starting to edit a buffer, after the
BufReadPost autocommands.
BufFilePost
BufFilePost After changing the name of the current buffer
with the ":file" or ":saveas" command.
BufFilePre
BufFilePre Before changing the name of the current buffer
with the ":file" or ":saveas" command.
BufHidden
BufHidden Just before a buffer becomes hidden. That is,
when there are no longer windows that show
the buffer, but the buffer is not unloaded or
deleted. Not used for ":qa" or ":q" when
exiting Vim.
NOTE: When this autocommand is executed, the
current buffer "%" may be different from the
buffer being unloaded "<afile>".
BufLeave
BufLeave Before leaving to another buffer. Also when
leaving or closing the current window and the
new current window is not for the same buffer.
Not used for ":qa" or ":q" when exiting Vim.
BufNew
BufNew Just after creating a new buffer. Also used
just after a buffer has been renamed. When
the buffer is added to the buffer list BufAdd
will be triggered too.
NOTE: When this autocommand is executed, the
current buffer "%" may be different from the
buffer being created "<afile>".
BufNewFile
BufNewFile When starting to edit a file that doesn't
exist. Can be used to read in a skeleton
file.
BufRead BufReadPost
BufRead or BufReadPost When starting to edit a new buffer, after
reading the file into the buffer, before
executing the modelines. See BufWinEnter
for when you need to do something after
processing the modelines.
Also triggered:
- when writing an unnamed buffer in a way that
the buffer gets a name
- after successfully recovering a file
- for the filetypedetect group when executing
":filetype detect"
Not triggered:
- for the `:read file` command
- when the file doesn't exist
BufReadCmd
BufReadCmd Before starting to edit a new buffer. Should
read the file into the buffer. Cmd-event
BufReadPre E200 E201
BufReadPre When starting to edit a new buffer, before
reading the file into the buffer. Not used
if the file doesn't exist.
BufUnload
BufUnload Before unloading a buffer. This is when the
text in the buffer is going to be freed. This
may be after a BufWritePost and before a
BufDelete. Also used for all buffers that are
loaded when Vim is going to exit.
NOTE: When this autocommand is executed, the
current buffer "%" may be different from the
buffer being unloaded "<afile>".
Don't change to another buffer or window, it
will cause problems!
When exiting and v:dying is 2 or more this
event is not triggered.
BufWinEnter
BufWinEnter After a buffer is displayed in a window. This
can be when the buffer is loaded (after
processing the modelines) or when a hidden
buffer is displayed in a window (and is no
longer hidden).
Does not happen for :split without
arguments, since you keep editing the same
buffer, or ":split" with a file that's already
open in a window, because it re-uses an
existing buffer. But it does happen for a
":split" with the name of the current buffer,
since it reloads that buffer.
Does not happen for a terminal window, because
it starts in Terminal-Job mode and Normal mode
commands won't work. Use TerminalOpen instead.
BufWinLeave
BufWinLeave Before a buffer is removed from a window.
Not when it's still visible in another window.
Also triggered when exiting. It's triggered
before BufUnload or BufHidden.
NOTE: When this autocommand is executed, the
current buffer "%" may be different from the
buffer being unloaded "<afile>".
When exiting and v:dying is 2 or more this
event is not triggered.
BufWipeout
BufWipeout Before completely deleting a buffer. The
BufUnload and BufDelete events may be called
first (if the buffer was loaded and was in the
buffer list). Also used just before a buffer
is renamed (also when it's not in the buffer
list).
NOTE: When this autocommand is executed, the
current buffer "%" may be different from the
buffer being deleted "<afile>".
Don't change to another buffer, it will cause
problems.
BufWrite BufWritePre
BufWrite or BufWritePre Before writing the whole buffer to a file.
BufWriteCmd
BufWriteCmd Before writing the whole buffer to a file.
Should do the writing of the file and reset
'modified' if successful, unless '+' is in
'cpo' and writing to another file cpo-+.
The buffer contents should not be changed.
When the command resets 'modified' the undo
information is adjusted to mark older undo
states as 'modified', like :write does.
Cmd-event
BufWritePost
BufWritePost After writing the whole buffer to a file
(should undo the commands for BufWritePre).
CmdUndefined
CmdUndefined When a user command is used but it isn't
defined. Useful for defining a command only
when it's used. The pattern is matched
against the command name. Both <amatch> and
<afile> are set to the name of the command.
NOTE: Autocompletion won't work until the
command is defined. An alternative is to
always define the user command and have it
invoke an autoloaded function. See autoload.
CmdlineChanged
CmdlineChanged After a change was made to the text in the
command line. Be careful not to mess up
the command line, it may cause Vim to lock up.
<afile> is set to a single character,
indicating the type of command-line.
cmdwin-char
CmdlineEnter
CmdlineEnter After moving the cursor to the command line,
where the user can type a command or search
string; including non-interactive use of ":"
in a mapping, but not when using <Cmd>.
The pattern is matched against the character
representing the type of command-line.
cmdwin-char
<afile> is set to a single character,
indicating the type of command-line.
CmdlineLeave
CmdlineLeave Before leaving the command line; including
non-interactive use of ":" in a mapping, but
not when using <Cmd>.
Also when abandoning the command line, after
typing CTRL-C or <Esc>.
When the commands result in an error the
command line is still executed.
<afile> is set to a single character,
indicating the type of command-line.
cmdwin-char
CmdwinEnter
CmdwinEnter After entering the command-line window.
Useful for setting options specifically for
this special type of window.
<afile> is set to a single character,
indicating the type of command-line.
cmdwin-char
CmdwinLeave
CmdwinLeave Before leaving the command-line window.
Useful to clean up any global setting done
with CmdwinEnter.
<afile> is set to a single character,
indicating the type of command-line.
cmdwin-char
ColorScheme
ColorScheme After loading a color scheme. :colorscheme
Not triggered if the color scheme is not
found.
The pattern is matched against the
colorscheme name. <afile> can be used for the
name of the actual file where this option was
set, and <amatch> for the new colorscheme
name.
ColorSchemePre
ColorSchemePre Before loading a color scheme. :colorscheme
Useful to setup removing things added by a
color scheme, before another one is loaded.
CompleteChanged CompleteChanged
After each time the Insert mode completion
menu changed. Not fired on popup menu hide,
use CompleteDonePre or CompleteDone for
that. Never triggered recursively.
Sets these v:event keys:
completed_item See complete-items.
height nr of items visible
width screen cells
row top screen row
col leftmost screen column
size total nr of items
scrollbar TRUE if visible
It is not allowed to change the text textlock.
The size and position of the popup are also
available by calling pum_getpos().
CompleteDonePre
CompleteDonePre After Insert mode completion is done. Either
when something was completed or abandoning
completion. ins-completion
complete_info() can be used, the info is
cleared after triggering CompleteDonePre.
The v:completed_item variable contains
information about the completed item.
CompleteDone
CompleteDone After Insert mode completion is done. Either
when something was completed or abandoning
completion. ins-completion
complete_info() cannot be used, the info is
cleared before triggering CompleteDone. Use
CompleteDonePre if you need it.
The v:completed_item variable contains
information about the completed item.
CursorHold
CursorHold When the user doesn't press a key for the time
specified with 'updatetime'. Not triggered
until the user has pressed a key (i.e. doesn't
fire every 'updatetime' ms if you leave Vim to
make some coffee. :) See CursorHold-example
for previewing tags.
This event is only triggered in Normal mode.
It is not triggered when waiting for a command
argument to be typed, or a movement after an
operator.
While recording the CursorHold event is not
triggered. q
<CursorHold>
Internally the autocommand is triggered by the
<CursorHold> key. In an expression mapping
getchar() may see this character.
Note: Interactive commands cannot be used for
this event. There is no hit-enter prompt,
the screen is updated directly (when needed).
Note: In the future there will probably be
another option to set the time.
Hint: to force an update of the status lines
use:
:let &ro = &ro
{only on Amiga, Unix, Win32 and all GUI
versions}
CursorHoldI
CursorHoldI Just like CursorHold, but in Insert mode.
Not triggered when waiting for another key,
e.g. after CTRL-V, and not when in CTRL-X mode
insert_expand.
CursorMoved
CursorMoved After the cursor was moved in Normal or Visual
mode. Also when the text of the cursor line
has been changed, e.g., with "x", "rx" or "p".
Not always triggered when there is typeahead,
while executing commands in a script file,
when an operator is pending or when moving to
another window while remaining at the same
cursor position.
For an example see match-parens.
Note: This can not be skipped with
:noautocmd.
Careful: This is triggered very often, don't
do anything that the user does not expect or
that is slow.
CursorMovedC
CursorMovedC After the cursor was moved in the command
line. Be careful not to mess up the command
line, it may cause Vim to lock up.
<afile> is set to a single character,
indicating the type of command-line.
cmdwin-char
CursorMovedI
CursorMovedI After the cursor was moved in Insert mode.
Not triggered when the popup menu is visible.
Otherwise the same as CursorMoved.
DiffUpdated
DiffUpdated After diffs have been updated. Depending on
what kind of diff is being used (internal or
external) this can be triggered on every
change or when doing :diffupdate.
DirChangedPre
DirChangedPre The working directory is going to be changed,
as with DirChanged. The pattern is like
with DirChanged. The new directory can be
found in v:event.directory.
DirChanged
DirChanged The working directory has changed in response
to the :cd or :tcd or :lcd commands, or
as a result of the 'autochdir' option.
The pattern can be:
"window" to trigger on :lcd
"tabpage" to trigger on :tcd
"global" to trigger on :cd
"auto" to trigger on 'autochdir'.
"drop" to trigger on editing a file
<afile> is set to the new directory name.
EncodingChanged
EncodingChanged Fires off after the 'encoding' option has been
changed. Useful to set up fonts, for example.
ExitPre
ExitPre When using :quit, :wq in a way it makes
Vim exit, or using :qall, just after
QuitPre. Can be used to close any
non-essential window. Exiting may still be
cancelled if there is a modified buffer that
isn't automatically saved, use VimLeavePre
for really exiting.
FileAppendCmd
FileAppendCmd Before appending to a file. Should do the
appending to the file. Use the '[ and ']
marks for the range of lines. Cmd-event
FileAppendPost
FileAppendPost After appending to a file.
FileAppendPre
FileAppendPre Before appending to a file. Use the '[ and ']
marks for the range of lines.
FileChangedRO
FileChangedRO Before making the first change to a read-only
file. Can be used to check-out the file from
a source control system. Not triggered when
the change was caused by an autocommand.
This event is triggered when making the first
change in a buffer or the first change after
'readonly' was set, just before the change is
applied to the text.
WARNING: If the autocommand moves the cursor
the effect of the change is undefined.
E788
It is not allowed to change to another buffer
here. You can reload the buffer but not edit
another one.
E881
If the number of lines changes saving for undo
may fail and the change will be aborted.
FileChangedShell
FileChangedShell When Vim notices that the modification time of
a file has changed since editing started.
Also when the file attributes of the file
change or when the size of the file changes.
timestamp
Mostly triggered after executing a shell
command, but also with a :checktime command
or when gvim regains input focus.
This autocommand is triggered for each changed
file. It is not used when 'autoread' is set
and the buffer was not changed. If a
FileChangedShell autocommand is present the
warning message and prompt is not given.
The v:fcs_reason variable is set to indicate
what happened and v:fcs_choice can be used
to tell Vim what to do next.
NOTE: When this autocommand is executed, the
current buffer "%" may be different from the
buffer that was changed, which is in "<afile>".
NOTE: The commands must not change the current
buffer, jump to another buffer or delete a
buffer. E246 E811
NOTE: This event never nests, to avoid an
endless loop. This means that while executing
commands for the FileChangedShell event no
other FileChangedShell event will be
triggered.
FileChangedShellPost
FileChangedShellPost After handling a file that was changed outside
of Vim. Can be used to update the statusline.
FileEncoding
FileEncoding Obsolete. It still works and is equivalent
to EncodingChanged.
FileReadCmd
FileReadCmd Before reading a file with a ":read" command.
Should do the reading of the file. Cmd-event
FileReadPost
FileReadPost After reading a file with a ":read" command.
Note that Vim sets the '[ and '] marks to the
first and last line of the read. This can be
used to operate on the lines just read.
FileReadPre
FileReadPre Before reading a file with a ":read" command.
FileType
FileType When the 'filetype' option has been set. The
pattern is matched against the filetype.
<afile> can be used for the name of the file
where this option was set, and <amatch> for
the new value of 'filetype'. Navigating to
another window or buffer is not allowed.
See filetypes.
FileWriteCmd
FileWriteCmd Before writing to a file, when not writing the
whole buffer. Should do the writing to the
file. Should not change the buffer. Use the
'[ and '] marks for the range of lines.
Cmd-event
FileWritePost
FileWritePost After writing to a file, when not writing the
whole buffer.
FileWritePre
FileWritePre Before writing to a file, when not writing the
whole buffer. Use the '[ and '] marks for the
range of lines.
FilterReadPost
FilterReadPost After reading a file from a filter command.
Vim checks the pattern against the name of
the current buffer as with FilterReadPre.
Not triggered when 'shelltemp' is off.
FilterReadPre E135
FilterReadPre Before reading a file from a filter command.
Vim checks the pattern against the name of
the current buffer, not the name of the
temporary file that is the output of the
filter command.
Not triggered when 'shelltemp' is off.
FilterWritePost
FilterWritePost After writing a file for a filter command or
making a diff with an external diff (see
DiffUpdated for internal diff).
Vim checks the pattern against the name of
the current buffer as with FilterWritePre.
Not triggered when 'shelltemp' is off.
FilterWritePre
FilterWritePre Before writing a file for a filter command or
making a diff with an external diff.
Vim checks the pattern against the name of
the current buffer, not the name of the
temporary file that is the output of the
filter command.
Not triggered when 'shelltemp' is off.
FocusGained
FocusGained When Vim got input focus. Only for the GUI
version and a few console versions where this
can be detected. xterm-focus-event
FocusLost
FocusLost When Vim lost input focus. Only for the GUI
version and a few console versions where this
can be detected. xterm-focus-event
May also happen when a dialog pops up.
FuncUndefined
FuncUndefined When a user function is used but it isn't
defined. Useful for defining a function only
when it's used. The pattern is matched
against the function name. Both <amatch> and
<afile> are set to the name of the function.
Not triggered when compiling a Vim9
function.
NOTE: When writing Vim scripts a better
alternative is to use an autoloaded function.
See autoload-functions.
GUIEnter
GUIEnter After starting the GUI successfully, and after
opening the window. It is triggered before
VimEnter when using gvim. Can be used to
position the window from a .gvimrc file:
:autocmd GUIEnter * winpos 100 50
GUIFailed
GUIFailed After starting the GUI failed. Vim may
continue to run in the terminal, if possible
(only on Unix and alikes, when connecting the
X server fails). You may want to quit Vim:
:autocmd GUIFailed * qall
InsertChange
InsertChange When typing <Insert> while in Insert or
Replace mode. The v:insertmode variable
indicates the new mode.
Be careful not to move the cursor or do
anything else that the user does not expect.
InsertCharPre
InsertCharPre When a character is typed in Insert mode,
before inserting the char.
The v:char variable indicates the char typed
and can be changed during the event to insert
a different character. When v:char is set
to more than one character this text is
inserted literally.
It is not allowed to change the text textlock.
The event is not triggered when 'paste' is
set. {only with the +eval feature}
InsertEnter
InsertEnter Just before starting Insert mode. Also for
Replace mode and Virtual Replace mode. The
v:insertmode variable indicates the mode.
Be careful not to do anything else that the
user does not expect.
The cursor is restored afterwards. If you do
not want that set v:char to a non-empty
string.
InsertLeavePre
InsertLeavePre Just before leaving Insert mode. Also when
using CTRL-O i_CTRL-O. Be careful not to
change mode or use :normal, it will likely
cause trouble.
InsertLeave
InsertLeave Just after leaving Insert mode. Also when
using CTRL-O i_CTRL-O. But not for i_CTRL-C.
KeyInputPre
KeyInputPre Just before a key is processed after mappings
have been applied. The pattern is matched
against a string that indicates the current
mode, which is the same as what is returned by
mode(1).
The v:char variable indicates the key typed
and can be changed during the event to process
a different key. When v:char is not a
single character or a special key, the first
character is used.
The following values of v:event are set:
typed The key is typed or not.
typedchar The (actual) typed key since
the last KeyInputPre call.
Note: "typedchar" may be empty if successive
KeyInputPre autocmds are processed.
It is not allowed to change the text
textlock or the current mode.
{only with the +eval feature}
MenuPopup Just before showing the popup menu (under the
right mouse button). Useful for adjusting the
menu for what is under the cursor or mouse
pointer.
The pattern is matched against one or two
characters representing the mode:
n Normal
v Visual
o Operator-pending
i Insert
c Command line
tl Terminal
ModeChanged
ModeChanged After changing the mode. The pattern is
matched against 'old_mode:new_mode', for
example match against *:c* to simulate
CmdlineEnter.
The following values of v:event are set:
old_mode The mode before it changed.
new_mode The new mode as also returned
by mode() called with a
non-zero argument.
When ModeChanged is triggered, old_mode will
have the value of new_mode when the event was
last triggered.
This will be triggered on every minor mode
change.
Usage example to use relative line numbers
when entering Visual mode:
:au ModeChanged [vV\x16]*:* let &l:rnu = mode() =~# '^[vV\x16]'
:au ModeChanged *:[vV\x16]* let &l:rnu = mode() =~# '^[vV\x16]'
:au WinEnter,WinLeave * let &l:rnu = mode() =~# '^[vV\x16]'
OptionSet
OptionSet After setting an option. The pattern is
matched against the long option name.
<amatch> indicates what option has been set.
v:option_type indicates whether it's global
or local scoped.
v:option_command indicates what type of
set/let command was used (follow the tag to
see the table).
v:option_new indicates the newly set value.
v:option_oldlocal has the old local value.
v:option_oldglobal has the old global value.
v:option_old indicates the old option value.
v:option_oldlocal is only set when :set
or :setlocal or a modeline was used to set
the option. Similarly v:option_oldglobal is
only set when :set or :setglobal was used.
This does not set <abuf>, you could use
bufnr().
Note that when setting a global-local string
option with :set, then v:option_old is the
old global value. However, for all other kinds
of options (local string options, global-local
number options, ...) it is the old local
value.
OptionSet is not triggered on startup and for
the 'key' option for obvious reasons.
Usage example: Check for the existence of the
directory in the 'backupdir' and 'undodir'
options, create the directory if it doesn't
exist yet.
Note: It's a bad idea to reset an option
during this autocommand, this may break a
plugin. You can always use :noa to prevent
triggering this autocommand.
When using :set in the autocommand the event
is not triggered again.
QuickFixCmdPre
QuickFixCmdPre Before a quickfix command is run (:make,
:lmake, :grep, :lgrep, :grepadd,
:lgrepadd, :vimgrep, :lvimgrep,
:vimgrepadd, :lvimgrepadd, :cscope,
:cfile, :cgetfile, :caddfile, :lfile,
:lgetfile, :laddfile, :helpgrep,
:lhelpgrep, :cexpr, :cgetexpr,
:caddexpr, :cbuffer, :cgetbuffer,
:caddbuffer).
The pattern is matched against the command
being run. When :grep is used but 'grepprg'
is set to "internal" it still matches "grep".
This command cannot be used to set the
'makeprg' and 'grepprg' variables.
If this command causes an error, the quickfix
command is not executed.
QuickFixCmdPost
QuickFixCmdPost Like QuickFixCmdPre, but after a quickfix
command is run, before jumping to the first
location. For :cfile and :lfile commands
it is run after the error file is read and
before moving to the first error.
See QuickFixCmdPost-example.
QuitPre
QuitPre When using :quit, :wq or :qall, before
deciding whether it closes the current window
or quits Vim. For :wq the buffer is written
before QuitPre is triggered. Can be used to
close any non-essential window if the current
window is the last ordinary window.
Also see ExitPre.
RemoteReply
RemoteReply When a reply from a Vim that functions as
server was received server2client(). The
pattern is matched against the {serverid}.
<amatch> is equal to the {serverid} from which
the reply was sent, and <afile> is the actual
reply string.
Note that even if an autocommand is defined,
the reply should be read with remote_read()
to consume it.
SafeState
SafeState When nothing is pending, going to wait for the
user to type a character.
This will not be triggered when:
- an operator is pending
- a register was entered with "r
- halfway executing a command
- executing a mapping
- there is typeahead
- Insert mode completion is active
- Command line completion is active
You can use mode() to find out what state
Vim is in. That may be:
- Visual mode
- Normal mode
- Insert mode
- Command-line mode
Depending on what you want to do, you may also
check more with state(), e.g. whether the
screen was scrolled for messages.
SafeStateAgain
SafeStateAgain Like SafeState but after processing any
messages and invoking callbacks. This may be
triggered often, don't do something that takes
time.
SessionLoadPost
SessionLoadPost After loading the session file created using
the :mksession command.
SessionWritePost
SessionWritePost After writing a session file by calling
the :mksession command.
ShellCmdPost
ShellCmdPost After executing a shell command with :!cmd,
:shell, :make and :grep. Can be used to
check for any changed files.
ShellFilterPost
ShellFilterPost After executing a shell command with
":{range}!cmd", ":w !cmd" or ":r !cmd".
Can be used to check for any changed files.
SourcePre
SourcePre Before sourcing a Vim script. :source
<afile> is the name of the file being sourced.
SourcePost
SourcePost After sourcing a Vim script. :source
<afile> is the name of the file being sourced.
Not triggered when sourcing was interrupted.
Also triggered after a SourceCmd autocommand
was triggered.
SourceCmd
SourceCmd When sourcing a Vim script. :source
<afile> is the name of the file being sourced.
The autocommand must source this file.
Cmd-event
SpellFileMissing
SpellFileMissing When trying to load a spell checking file and
it can't be found. The pattern is matched
against the language. <amatch> is the
language, 'encoding' also matters. See
spell-SpellFileMissing.
StdinReadPost
StdinReadPost After reading from the stdin into the buffer,
before executing the modelines. Only used
when the "-" argument was used when Vim was
started --.
StdinReadPre
StdinReadPre Before reading from stdin into the buffer.
Only used when the "-" argument was used when
Vim was started --.
SwapExists
SwapExists Detected an existing swap file when starting
to edit a file. Only when it is possible to
select a way to handle the situation, when Vim
would ask the user what to do.
The v:swapname variable holds the name of
the swap file found, <afile> the file being
edited. v:swapcommand may contain a command
to be executed in the opened file.
The commands should set the v:swapchoice
variable to a string with one character to
tell Vim what should be done next:
'o' open read-only
'e' edit the file anyway
'r' recover
'd' delete the swap file
'q' quit, don't edit the file
'a' abort, like hitting CTRL-C
When set to an empty string the user will be
asked, as if there was no SwapExists autocmd.
E812
It is not allowed to change to another buffer,
change a buffer name or change directory
here.
{only available with the +eval feature}
Syntax
Syntax When the 'syntax' option has been set. The
pattern is matched against the syntax name.
<afile> can be used for the name of the file
where this option was set, and <amatch> for
the new value of 'syntax'.
See :syn-on.
TabClosed
TabClosed After closing a tab page.
TabEnter
TabEnter Just after entering a tab page. tab-page
After triggering the WinEnter and before
triggering the BufEnter event.
TabLeave
TabLeave Just before leaving a tab page. tab-page
A WinLeave event will have been triggered
first.
TabNew
TabNew When a tab page was created. tab-page
A WinEnter event will have been triggered
first, TabEnter follows.
TermChanged
TermChanged After the value of 'term' has changed. Useful
for re-loading the syntax file to update the
colors, fonts and other terminal-dependent
settings. Executed for all loaded buffers.
TerminalOpen
TerminalOpen Just after a terminal buffer was created, with
:terminal or term_start(). This event is
triggered even if the buffer is created
without a window, with the ++hidden option.
TerminalWinOpen
TerminalWinOpen Just after a terminal buffer was created, with
:terminal or term_start(). This event is
triggered only if the buffer is created
with a window. Can be used to set window
local options for the terminal window.
TermResponse
TermResponse After the response to t_RV is received from
the terminal. The value of v:termresponse
can be used to do things depending on the
terminal version.
This is used in defaults.vim to detect
putty terminal and set a dark background:
au TermResponse *
\ if v:termresponse == "\e[>0;136;0c"
\ set bg=dark
\ endif
Note: that this event may be triggered halfway
executing another event, especially if file
I/O, a shell command or anything else that
takes time is involved.
TermResponseAll
TermResponseAll After the response to t_RV, t_RC, t_RS,
t_RB, t_RF, or t_u7 are received from
the terminal. The value of v:termresponse,
v:termblinkresp, v:termstyleresp,
v:termrbgresp, v:termrfgresp, and
v:termu7resp, correspondingly, can be used.
<amatch> will be set to any of:
"version",
"cursorblink",
"cursorshape",
"background",
"foreground",
"ambiguouswidth"
Note that this event may be triggered halfway
executing another event, especially if file I/O,
a shell command or anything else that takes time
is involved.
TextChanged
TextChanged After a change was made to the text in the
current buffer in Normal mode. That is after
b:changedtick has changed (also when that
happened before the TextChanged autocommand
was defined).
Not triggered when there is typeahead or when
an operator is pending.
Note: This can not be skipped with
:noautocmd.
Careful: This is triggered very often, don't
do anything that the user does not expect or
that is slow.
TextChangedI
TextChangedI After a change was made to the text in the
current buffer in Insert mode.
Not triggered when the popup menu is visible.
Otherwise the same as TextChanged.
TextChangedP
TextChangedP After a change was made to the text in the
current buffer in Insert mode, only when the
popup menu is visible. Otherwise the same as
TextChanged.
TextChangedT
TextChangedT After a change was made to the text in the
current buffer in Terminal mode.
Otherwise the same as TextChanged.
TextYankPost
TextYankPost After text has been yanked or deleted in the
current buffer. The following values of
v:event can be used to determine the operation
that triggered this autocmd:
inclusive TRUE if the motion is
inclusive else the motion is
exclusive.
operator The operation performed.
regcontents Text that was stored in the
register, as a list of lines,
like with:
getreg(r, 1, 1)
regname Name of the register or empty
string for the unnamed
register, see registers.
regtype Type of the register, see
getregtype().
visual True if the operation is
performed on a Visual area.
Not triggered when quote_ is used nor when
called recursively.
It is not allowed to change the buffer text,
see textlock. E1064
{only when compiled with the +eval feature}
User
User Never executed automatically. To be used for
autocommands that are only executed with
":doautocmd".
Note that when `:doautocmd User MyEvent` is
used while there are no matching autocommands,
you will get an error. If you don't want
that, either check whether an autocommand is
defined using exists('#User#MyEvent') or
define a dummy autocommand yourself.
Example:
if exists('#User#MyEvent')
doautocmd User MyEvent
endif
SigUSR1
SigUSR1 After the SIGUSR1 signal has been detected.
Could be used if other ways of notifying Vim
are not feasible. E.g. to check for the
result of a build that takes a long time, or
when a motion sensor is triggered.
{only on Unix}
UserGettingBored
UserGettingBored When the user presses the same key 42 times.
Just kidding! :-)
VimEnter
VimEnter After doing all the startup stuff, including
loading .vimrc files, executing the "-c cmd"
arguments, creating all windows and loading
the buffers in them.
Just before this event is triggered the
v:vim_did_enter variable is set, so that you
can do:
if v:vim_did_enter
call s:init()
else
au VimEnter * call s:init()
endif
VimLeave
VimLeave Before exiting Vim, just after writing the
.viminfo file. Executed only once, like
VimLeavePre.
To detect an abnormal exit use v:dying.
When v:dying is 2 or more this event is not
triggered.
To get the exit code use v:exiting.
VimLeavePre
VimLeavePre Before exiting Vim, just before writing the
.viminfo file. This is executed only once,
if there is a match with the name of what
happens to be the current buffer when exiting.
Mostly useful with a "*" pattern.
:autocmd VimLeavePre * call CleanupStuff()
To detect an abnormal exit use v:dying.
When v:dying is 2 or more this event is not
triggered.
To get the exit code use v:exiting.
VimResized
VimResized After the Vim window was resized, thus 'lines'
and/or 'columns' changed. Not when starting
up though.
VimResume
VimResume When the Vim instance is resumed after being
suspended and VimSuspend was triggered.
Useful for triggering :checktime and ensure
the buffers content did not change while Vim
was suspended:
:autocmd VimResume * checktime
VimSuspend
VimSuspend When the Vim instance is suspended. Only when
CTRL-Z was typed inside Vim, or when the SIGTSTP
signal was sent to Vim, but not for SIGSTOP.
WinClosed
WinClosed When closing a window, just before it is
removed from the window layout. The pattern
is matched against the window-ID. Both
<amatch> and <afile> are set to the
window-ID. Non-recursive (event cannot
trigger itself).
WinEnter
WinEnter After entering another window. Not done for
the first window, when Vim has just started.
Useful for setting the window height.
If the window is for another buffer, Vim
executes the BufEnter autocommands after the
WinEnter autocommands.
Note: For split and tabpage commands the
WinEnter event is triggered after the split
or tab command but before the file is loaded.
WinLeave
WinLeave Before leaving a window. If the window to be
entered next is for a different buffer, Vim
executes the BufLeave autocommands before the
WinLeave autocommands (but not for ":new").
Not used for ":qa" or ":q" when exiting Vim.
WinNewPre
WinNewPre Before creating a new window. Triggered
before commands that modify window layout by
creating a split.
Not done when creating tab pages and for the
first window, as the window structure is not
initialized yet and so is generally not safe.
It is not allowed to modify window layout
while executing commands for the WinNewPre
event.
Most useful to store current window layout
and compare it with the new layout after the
Window has been created.
WinNew
WinNew When a new window was created. Not done for
the first window, when Vim has just started.
Before a WinEnter event.
WinScrolled
WinScrolled After any window in the current tab page
scrolled the text (horizontally or vertically)
or changed width or height. See
win-scrolled-resized.
The pattern is matched against the window-ID
of the first window that scrolled or resized.
Both <amatch> and <afile> are set to the
window-ID.
v:event is set with information about size
and scroll changes. WinScrolled-event
Only starts triggering after startup finished
and the first screen redraw was done.
Does not trigger when defining the first
WinScrolled or WinResized event, but may
trigger when adding more.
Non-recursive: the event will not trigger
while executing commands for the WinScrolled
event. However, if the command causes a
window to scroll or change size, then another
WinScrolled event will be triggered later.
WinResized
WinResized After a window in the current tab page changed
width or height.
See win-scrolled-resized.
v:event is set with information about size
changes. WinResized-event
Same behavior as WinScrolled for the
pattern, triggering and recursiveness.
==============================================================================
6. Patterns autocmd-patterns {aupat}
The {aupat} argument of :autocmd can be a comma-separated list. This works as
if the command was given with each pattern separately. Thus this command:
:autocmd BufRead *.txt,*.info set et
Is equivalent to:
:autocmd BufRead *.txt set et
:autocmd BufRead *.info set et
The file pattern {aupat} is tested for a match against the file name in one of
two ways:
1. When there is no '/' in the pattern, Vim checks for a match against only
the tail part of the file name (without its leading directory path).
2. When there is a '/' in the pattern, Vim checks for a match against both the
short file name (as you typed it) and the full file name (after expanding
it to a full path and resolving symbolic links).
The special pattern <buffer> or <buffer=N> is used for buffer-local
autocommands autocmd-buflocal. This pattern is not matched against the name
of a buffer.
Examples:
:autocmd BufRead *.txt set et
Set the 'et' option for all text files.
:autocmd BufRead /vim/src/*.c set cindent
Set the 'cindent' option for C files in the /vim/src directory.
:autocmd BufRead /tmp/*.c set ts=5
If you have a link from "/tmp/test.c" to "/home/nobody/vim/src/test.c", and
you start editing "/tmp/test.c", this autocommand will match.
Note: To match part of a path, but not from the root directory, use a '*' as
the first character. Example:
:autocmd BufRead */doc/*.txt set tw=78
This autocommand will for example be executed for "/tmp/doc/xx.txt" and
"/usr/home/piet/doc/yy.txt". The number of directories does not matter here.
The file name that the pattern is matched against is after expanding
wildcards. Thus if you issue this command:
:e $ROOTDIR/main.$EXT
The argument is first expanded to:
/usr/root/main.py
Before it's matched with the pattern of the autocommand. Careful with this
when using events like FileReadCmd, the value of <amatch> may not be what you
expect.
Environment variables can be used in a pattern:
:autocmd BufRead $VIMRUNTIME/doc/*.txt set expandtab
And ~ can be used for the home directory (if $HOME is defined):
:autocmd BufWritePost ~/.vimrc so ~/.vimrc
:autocmd BufRead ~archive/* set readonly
The environment variable is expanded when the autocommand is defined, not when
the autocommand is executed. This is different from the command!
file-pattern
The pattern is interpreted like mostly used in file names:
* matches any sequence of characters; Unusual: includes path
separators
? matches any single character
\? matches a '?'
. matches a '.'
~ matches a '~'
, separates patterns
\, matches a ','
{ } like \( \) in a pattern
, inside { }: like \| in a pattern
\} literal }
\{ literal {
\\\{n,m\} like \{n,m} in a pattern
\ special meaning like in a pattern
[ch] matches 'c' or 'h'
[^ch] match any character but 'c' and 'h'
Note that for all systems the '/' character is used for path separator (even
for MS-Windows). This was done because the backslash is difficult to use in a
pattern and to make the autocommands portable across different systems.
It is possible to use pattern items, but they may not work as expected,
because of the translation done for the above.
autocmd-changes
Matching with the pattern is done when an event is triggered. Changing the
buffer name in one of the autocommands, or even deleting the buffer, does not
change which autocommands will be executed. Example:
au BufEnter *.foo bdel
au BufEnter *.foo set modified
This will delete the current buffer and then set 'modified' in what has become
the current buffer instead. Vim doesn't take into account that "*.foo"
doesn't match with that buffer name. It matches "*.foo" with the name of the
buffer at the moment the event was triggered.
However, buffer-local autocommands will not be executed for a buffer that has
been wiped out with :bwipe. After deleting the buffer with :bdel the
buffer actually still exists (it becomes unlisted), thus the autocommands are
still executed.
==============================================================================
7. Buffer-local autocommands autocmd-buflocal autocmd-buffer-local
<buffer=N> <buffer=abuf> E680
Buffer-local autocommands are attached to a specific buffer. They are useful
if the buffer does not have a name and when the name does not match a specific
pattern. But it also means they must be explicitly added to each buffer.
Instead of a pattern buffer-local autocommands use one of these forms:
<buffer> current buffer
<buffer=99> buffer number 99
<buffer=abuf> using <abuf> (only when executing autocommands)
<abuf>
Examples:
:au CursorHold <buffer> echo 'hold'
:au CursorHold <buffer=33> echo 'hold'
:au BufNewFile * au CursorHold <buffer=abuf> echo 'hold'
All the commands for autocommands also work with buffer-local autocommands,
simply use the special string instead of the pattern. Examples:
:au! * <buffer> " remove buffer-local autocommands for
" current buffer
:au! * <buffer=33> " remove buffer-local autocommands for
" buffer #33
:bufdo :au! CursorHold <buffer> " remove autocmd for given event for all
" buffers
:au * <buffer> " list buffer-local autocommands for
" current buffer
Note that when an autocommand is defined for the current buffer, it is stored
with the buffer number. Thus it uses the form "<buffer=12>", where 12 is the
number of the current buffer. You will see this when listing autocommands,
for example.
To test for presence of buffer-local autocommands use the exists() function
as follows:
:if exists("#CursorHold#<buffer=12>") | ... | endif
:if exists("#CursorHold#<buffer>") | ... | endif " for current buffer
When a buffer is wiped out its buffer-local autocommands are also gone, of
course. Note that when deleting a buffer, e.g., with ":bdel", it is only
unlisted, the autocommands are still present. In order to see the removal of
buffer-local autocommands:
:set verbose=6
It is not possible to define buffer-local autocommands for a non-existent
buffer.
==============================================================================
8. Groups autocmd-groups
Autocommands can be put together in a group. This is useful for removing or
executing a group of autocommands. For example, all the autocommands for
syntax highlighting are put in the "highlight" group, to be able to execute
":doautoall highlight BufRead" when the GUI starts.
When no specific group is selected, Vim uses the default group. The default
group does not have a name. You cannot execute the autocommands from the
default group separately; you can execute them only by executing autocommands
for all groups.
Normally, when executing autocommands automatically, Vim uses the autocommands
for all groups. The group only matters when executing autocommands with
":doautocmd" or ":doautoall", or when defining or deleting autocommands.
The group name can contain any characters except white space. The group name
"end" is reserved (also in uppercase).
The group name is case sensitive. Note that this is different from the event
name!
:aug :augroup
:aug[roup] {name} Define the autocmd group name for the
following ":autocmd" commands. The name "end"
or "END" selects the default group.
To avoid confusion, the name should be
different from existing {event} names, as this
most likely will not do what you intended.
:augroup-delete E367 W19 E936
:aug[roup]! {name} Delete the autocmd group {name}. Don't use
this if there is still an autocommand using
this group! You will get a warning if doing
it anyway. When the group is the current
group you will get error E936.
To enter autocommands for a specific group, use this method:
1. Select the group with ":augroup {name}".
2. Delete any old autocommands with ":au!".
3. Define the autocommands.
4. Go back to the default group with "augroup END".
Example:
:augroup uncompress
: au!
: au BufEnter *.gz %!gunzip
:augroup END
This prevents having the autocommands defined twice (e.g., after sourcing the
.vimrc file again).
FileExplorer
There is one group that is recognized by Vim: FileExplorer. If this group
exists Vim assumes that editing a directory is possible and will trigger a
plugin that lists the files in that directory. This is used by the netrw
plugin. This allows you to do:
browse edit
==============================================================================
9. Executing autocommands autocmd-execute
Vim can also execute Autocommands non-automatically. This is useful if you
have changed autocommands, or when Vim has executed the wrong autocommands
(e.g., the file pattern match was wrong).
Note that the 'eventignore' option applies here too. Events listed in this
option will not cause any commands to be executed.
:do :doau :doaut :doautocmd E217
:do[autocmd] [<nomodeline>] [group] {event} [fname]
Apply the autocommands matching [fname] (default:
current file name) for {event} to the current buffer.
You can use this when the current file name does not
match the right pattern, after changing settings, or
to execute autocommands for a certain event.
It's possible to use this inside an autocommand too,
so you can base the autocommands for one extension on
another extension. Example:
:au BufEnter *.cpp so ~/.vimrc_cpp
:au BufEnter *.cpp doau BufEnter x.c
Be careful to avoid endless loops. See
autocmd-nested.
When the [group] argument is not given, Vim executes
the autocommands for all groups. When the [group]
argument is included, Vim executes only the matching
autocommands for that group. Note: if you use an
undefined group name, Vim gives you an error message.
<nomodeline>
After applying the autocommands the modelines are
processed, so that their settings overrule the
settings from autocommands, like what happens when
editing a file. This is skipped when the <nomodeline>
argument is present. You probably want to use
<nomodeline> for events that are not used when loading
a buffer, such as User.
Processing modelines is also skipped when no
matching autocommands were executed.
:doautoa :doautoall
:doautoa[ll] [<nomodeline>] [group] {event} [fname]
Like ":doautocmd", but apply the autocommands to each
loaded buffer. The current buffer is done last.
Note that [fname] is used to select the autocommands,
not the buffers to which they are applied. Example:
augroup mine
autocmd!
autocmd FileType * echo expand('<amatch>')
augroup END
doautoall mine FileType Loaded-Buffer
Sourcing this script, you'll see as many
"Loaded-Buffer" echoed as there are loaded buffers.
Careful: Don't use this for autocommands that delete a
buffer, change to another buffer or change the
contents of a buffer; the result is unpredictable.
This command is intended for autocommands that set
options, change highlighting, and things like that.
==============================================================================
10. Using autocommands autocmd-use
For WRITING FILES there are four possible sets of events. Vim uses only one
of these sets for a write command:
BufWriteCmd BufWritePre BufWritePost writing the whole buffer
FilterWritePre FilterWritePost writing to filter temp file
FileAppendCmd FileAppendPre FileAppendPost appending to a file
FileWriteCmd FileWritePre FileWritePost any other file write
When there is a matching "*Cmd" autocommand, it is assumed it will do the
writing. No further writing is done and the other events are not triggered.
Cmd-event
Note that the *WritePost commands should undo any changes to the buffer that
were caused by the *WritePre commands; otherwise, writing the file will have
the side effect of changing the buffer.
Before executing the autocommands, the buffer from which the lines are to be
written temporarily becomes the current buffer. Unless the autocommands
change the current buffer or delete the previously current buffer, the
previously current buffer is made the current buffer again.
The *WritePre and *AppendPre autocommands must not delete the buffer from
which the lines are to be written.
The '[ and '] marks have a special position:
- Before the *ReadPre event the '[ mark is set to the line just above where
the new lines will be inserted.
- Before the *ReadPost event the '[ mark is set to the first line that was
just read, the '] mark to the last line.
- Before executing the *WriteCmd, *WritePre and *AppendPre autocommands the '[
mark is set to the first line that will be written, the '] mark to the last
line.
Careful: '[ and '] change when using commands that change the buffer.
In commands which expect a file name, you can use "<afile>" for the file name
that is being read :<afile> (you can also use "%" for the current file
name). "<abuf>" can be used for the buffer number of the currently effective
buffer. This also works for buffers that don't have a name. But it doesn't
work for files without a buffer (e.g., with ":r file").
gzip-example
Examples for reading and writing compressed files:
:augroup gzip
: autocmd!
: autocmd BufReadPre,FileReadPre *.gz set bin
: autocmd BufReadPost,FileReadPost *.gz '[,']!gunzip
: autocmd BufReadPost,FileReadPost *.gz set nobin
: autocmd BufReadPost,FileReadPost *.gz execute ":doautocmd BufReadPost " .. expand("%:r")
: autocmd BufWritePost,FileWritePost *.gz !mv <afile> <afile>:r
: autocmd BufWritePost,FileWritePost *.gz !gzip <afile>:r
: autocmd FileAppendPre *.gz !gunzip <afile>
: autocmd FileAppendPre *.gz !mv <afile>:r <afile>
: autocmd FileAppendPost *.gz !mv <afile> <afile>:r
: autocmd FileAppendPost *.gz !gzip <afile>:r
:augroup END
The "gzip" group is used to be able to delete any existing autocommands with
":autocmd!", for when the file is sourced twice.
("<afile>:r" is the file name without the extension, see :_%:)
The commands executed for the BufNewFile, BufRead/BufReadPost, BufWritePost,
FileAppendPost and VimLeave events do not set or reset the changed flag of the
buffer. When you decompress the buffer with the BufReadPost autocommands, you
can still exit with ":q". When you use ":undo" in BufWritePost to undo the
changes made by BufWritePre commands, you can still do ":q" (this also makes
"ZZ" work). If you do want the buffer to be marked as modified, set the
'modified' option.
To execute Normal mode commands from an autocommand, use the ":normal"
command. Use with care! If the Normal mode command is not finished, the user
needs to type characters (e.g., after ":normal m" you need to type a mark
name).
If you want the buffer to be unmodified after changing it, reset the
'modified' option. This makes it possible to exit the buffer with ":q"
instead of ":q!".
autocmd-nested E218
By default, autocommands do not nest. For example, if you use ":e" or ":w" in
an autocommand, Vim does not execute the BufRead and BufWrite autocommands for
those commands. If you do want this, use the "nested" flag for those commands
in which you want nesting. For example:
:autocmd FileChangedShell *.c ++nested e!
The nesting is limited to 10 levels to get out of recursive loops.
It's possible to use the ":au" command in an autocommand. This can be a
self-modifying command! This can be useful for an autocommand that should
execute only once.
If you want to skip autocommands for one command, use the :noautocmd command
modifier or the 'eventignore' option.
Note: When reading a file (with ":read file" or with a filter command) and the
last line in the file does not have an <EOL>, Vim remembers this. At the next
write (with ":write file" or with a filter command), if the same line is
written again as the last line in a file AND 'binary' is set, Vim does not
supply an <EOL>. This makes a filter command on the just read lines write the
same file as was read, and makes a write command on just filtered lines write
the same file as was read from the filter. For example, another way to write
a compressed file:
:autocmd FileWritePre *.gz set bin|'[,']!gzip
:autocmd FileWritePost *.gz undo|set nobin
autocommand-pattern
You can specify multiple patterns, separated by commas. Here are some
examples:
:autocmd BufRead * set tw=79 nocin ic infercase fo=2croq
:autocmd BufRead .letter set tw=72 fo=2tcrq
:autocmd BufEnter .letter set dict=/usr/lib/dict/words
:autocmd BufLeave .letter set dict=
:autocmd BufRead,BufNewFile *.c,*.h set tw=0 cin noic
:autocmd BufEnter *.c,*.h abbr FOR for (i = 0; i < 3; ++i)<CR>{<CR>}<Esc>O
:autocmd BufLeave *.c,*.h unabbr FOR
For makefiles (makefile, Makefile, imakefile, makefile.unix, etc.):
:autocmd BufEnter ?akefile* set include=^s\=include
:autocmd BufLeave ?akefile* set include&
To always start editing C files at the first function:
:autocmd BufRead *.c,*.h 1;/^{
Without the "1;" above, the search would start from wherever the file was
entered, rather than from the start of the file.
skeleton template
To read a skeleton (template) file when opening a new file:
:autocmd BufNewFile *.c 0r ~/vim/skeleton.c
:autocmd BufNewFile *.h 0r ~/vim/skeleton.h
:autocmd BufNewFile *.java 0r ~/vim/skeleton.java
To insert the current date and time in a *.html file when writing it:
:autocmd BufWritePre,FileWritePre *.html ks|call LastMod()|'s
:fun LastMod()
: if line("$") > 20
: let l = 20
: else
: let l = line("$")
: endif
: exe "1," .. l .. "g/Last modified: /s/Last modified: .*/Last modified: " ..
: \ strftime("%Y %b %d")
:endfun
You need to have a line "Last modified: <date time>" in the first 20 lines
of the file for this to work. Vim replaces <date time> (and anything in the
same line after it) with the current date and time. Explanation:
ks mark current position with mark 's'
call LastMod() call the LastMod() function to do the work
's return the cursor to the old position
The LastMod() function checks if the file is shorter than 20 lines, and then
uses the ":g" command to find lines that contain "Last modified: ". For those
lines the ":s" command is executed to replace the existing date with the
current one. The ":execute" command is used to be able to use an expression
for the ":g" and ":s" commands. The date is obtained with the strftime()
function. You can change its argument to get another date string.
When entering :autocmd on the command-line, completion of events and command
names may be done (with <Tab>, CTRL-D, etc.) where appropriate.
Vim executes all matching autocommands in the order that you specify them.
It is recommended that your first autocommand be used for all files by using
"*" as the file pattern. This means that you can define defaults you like
here for any settings, and if there is another matching autocommand it will
override these. But if there is no other matching autocommand, then at least
your default settings are recovered (if entering this file from another for
which autocommands did match). Note that "*" will also match files starting
with ".", unlike Unix shells.
autocmd-searchpat
Autocommands do not change the current search patterns. Vim saves the current
search patterns before executing autocommands then restores them after the
autocommands finish. This means that autocommands do not affect the strings
highlighted with the 'hlsearch' option. Within autocommands, you can still
use search patterns normally, e.g., with the "n" command.
If you want an autocommand to set the search pattern, such that it is used
after the autocommand finishes, use the ":let @/ =" command.
The search-highlighting cannot be switched off with ":nohlsearch" in an
autocommand. Use the 'h' flag in the 'viminfo' option to disable search-
highlighting when starting Vim.
Cmd-event
When using one of the "*Cmd" events, the matching autocommands are expected to
do the file reading, writing or sourcing. This can be used when working with
a special kind of file, for example on a remote system.
CAREFUL: If you use these events in a wrong way, it may have the effect of
making it impossible to read or write the matching files! Make sure you test
your autocommands properly. Best is to use a pattern that will never match a
normal file name, for example "ftp://*".
When defining a BufReadCmd it will be difficult for Vim to recover a crashed
editing session. When recovering from the original file, Vim reads only those
parts of a file that are not found in the swap file. Since that is not
possible with a BufReadCmd, use the :preserve command to make sure the
original file isn't needed for recovery. You might want to do this only when
you expect the file to be modified.
For file read and write commands the v:cmdarg variable holds the "++enc="
and "++ff=" argument that are effective. These should be used for the command
that reads/writes the file. The v:cmdbang variable is one when "!" was
used, zero otherwise.
See the $VIMRUNTIME/plugin/netrwPlugin.vim for examples.
==============================================================================
11. Disabling autocommands autocmd-disable
To disable autocommands for some time use the 'eventignore' option. Note that
this may cause unexpected behavior, make sure you restore 'eventignore'
afterwards, using a :try block with :finally.
:noautocmd :noa
To disable autocommands for just one command use the ":noautocmd" command
modifier. This will set 'eventignore' to "all" for the duration of the
following command. Example:
:noautocmd w fname.gz
This will write the file without triggering the autocommands defined by the
gzip plugin.
Note that some autocommands are not triggered right away, but only later.
This specifically applies to CursorMoved and TextChanged.
vim:tw=78:ts=8:noet:ft=help:norl: