filetype.txt For Vim version 9.1. Last change: 2024 Dec 04
VIM REFERENCE MANUAL by Bram Moolenaar
Filetypes filetype file-type
1. Filetypes filetypes
2. Filetype plugin filetype-plugins
3. Docs for the default filetype plugins. ftplugin-docs
Also see autocmd.txt.
==============================================================================
1. Filetypes filetypes file-types
Vim can detect the type of file that is edited. This is done by checking the
file name and sometimes by inspecting the contents of the file for specific
text.
:filetype :filet
To enable file type detection, use this command in your vimrc:
:filetype on
Each time a new or existing file is edited, Vim will try to recognize the type
of the file and set the 'filetype' option. This will trigger the FileType
event, which can be used to set the syntax highlighting, set options, etc.
NOTE: Filetypes and 'compatible' don't work together well, since being Vi
compatible means options are global. Resetting 'compatible' is recommended,
if you didn't do that already.
Detail: The ":filetype on" command will load one of these files:
Amiga $VIMRUNTIME/filetype.vim
Mac $VIMRUNTIME:filetype.vim
MS-Windows $VIMRUNTIME\filetype.vim
Unix $VIMRUNTIME/filetype.vim
VMS $VIMRUNTIME/filetype.vim
This file is a Vim script that defines autocommands for the
BufNewFile and BufRead events. If the file type is not found by the
name, the file $VIMRUNTIME/scripts.vim is used to detect it from the
contents of the file.
When the GUI is running or will start soon, the menu.vim script is
also sourced. See 'go-M' about avoiding that.
To add your own file types, see new-filetype below. To search for help on a
filetype prepend "ft-" and optionally append "-syntax", "-indent" or
"-plugin". For example:
:help ft-vim-indent
:help ft-vim-syntax
:help ft-man-plugin
If the file type is not detected automatically, or it finds the wrong type,
you can either set the 'filetype' option manually, or add a modeline to your
file. Example, for an IDL file use the command:
:set filetype=idl
or add this modeline to the file:
/* vim: set filetype=idl : */
:filetype-plugin-on
You can enable loading the plugin files for specific file types with:
:filetype plugin on
If filetype detection was not switched on yet, it will be as well.
This actually loads the file "ftplugin.vim" in 'runtimepath'.
The result is that when a file is edited its plugin file is loaded (if there
is one for the detected filetype). filetype-plugin
:filetype-plugin-off
You can disable it again with:
:filetype plugin off
The filetype detection is not switched off then. But if you do switch off
filetype detection, the plugins will not be loaded either.
This actually loads the file "ftplugof.vim" in 'runtimepath'.
:filetype-indent-on
You can enable loading the indent file for specific file types with:
:filetype indent on
If filetype detection was not switched on yet, it will be as well.
This actually loads the file "indent.vim" in 'runtimepath'.
The result is that when a file is edited its indent file is loaded (if there
is one for the detected filetype). indent-expression
:filetype-indent-off
You can disable it again with:
:filetype indent off
The filetype detection is not switched off then. But if you do switch off
filetype detection, the indent files will not be loaded either.
This actually loads the file "indoff.vim" in 'runtimepath'.
This disables auto-indenting for files you will open. It will keep working in
already opened files. Reset 'autoindent', 'cindent', 'smartindent' and/or
'indentexpr' to disable indenting in an opened file.
:filetype-off
To disable file type detection, use this command:
:filetype off
This will keep the flags for "plugin" and "indent", but since no file types
are being detected, they won't work until the next ":filetype on".
Overview: :filetype-overview
command detection plugin indent
:filetype on on unchanged unchanged
:filetype off off unchanged unchanged
:filetype plugin on on on unchanged
:filetype plugin off unchanged off unchanged
:filetype indent on on unchanged on
:filetype indent off unchanged unchanged off
:filetype plugin indent on on on on
:filetype plugin indent off unchanged off off
To see the current status, type:
:filetype
The output looks something like this:
filetype detection:ON plugin:ON indent:OFF
The file types are also used for syntax highlighting. If the ":syntax on"
command is used, the file type detection is installed too. There is no need
to do ":filetype on" after ":syntax on".
To disable one of the file types, add a line in your filetype file, see
remove-filetype.
filetype-detect
To detect the file type again:
:filetype detect
Use this if you started with an empty file and typed text that makes it
possible to detect the file type. For example, when you entered this in a
shell script: "#!/bin/csh".
When filetype detection was off, it will be enabled first, like the "on"
argument was used.
filetype-overrule
When the same extension is used for multiple filetypes, Vim tries to guess
what kind of file it is. This doesn't always work. A number of global
variables can be used to overrule the filetype used for certain extensions:
file name variable
*.asa g:filetype_asa ft-aspperl-syntax
ft-aspvbs-syntax
*.asm g:asmsyntax ft-asm-syntax
*.asp g:filetype_asp ft-aspperl-syntax
ft-aspvbs-syntax
*.bas g:filetype_bas ft-basic-syntax
*.cfg g:filetype_cfg
*.cls g:filetype_cls
*.csh g:filetype_csh ft-csh-syntax
*.dat g:filetype_dat
*.def g:filetype_def
*.dsp g:filetype_dsp
*.f g:filetype_f ft-forth-syntax
*.frm g:filetype_frm ft-form-syntax
*.fs g:filetype_fs ft-forth-syntax
*.h g:c_syntax_for_h ft-c-syntax
*.i g:filetype_i ft-progress-syntax
*.inc g:filetype_inc
*.lsl g:filetype_lsl
*.m g:filetype_m ft-mathematica-syntax
*.markdown,*.mdown,*.mkd,*.mkdn,*.mdwn,*.md
g:filetype_md ft-pandoc-syntax
*.mod g:filetype_mod
*.p g:filetype_p ft-pascal-syntax
*.pl g:filetype_pl
*.pp g:filetype_pp ft-pascal-syntax
*.prg g:filetype_prg
*.r g:filetype_r
*.sig g:filetype_sig
*.sql g:filetype_sql ft-sql-syntax
*.src g:filetype_src
*.sys g:filetype_sys
*.sh g:bash_is_sh ft-sh-syntax
*.tex g:tex_flavor ft-tex-plugin
*.typ g:filetype_typ
*.v g:filetype_v
*.w g:filetype_w ft-cweb-syntax
For a few filetypes the global variable is used only when the filetype could
not be detected:
*.r g:filetype_r ft-rexx-syntax
filetype-ignore
To avoid that certain files are being inspected, the g:ft_ignore_pat variable
is used. The default value is set like this:
:let g:ft_ignore_pat = '\.\(Z\|gz\|bz2\|zip\|tgz\)$'
This means that the contents of compressed files are not inspected.
new-filetype
If a file type that you want to use is not detected yet, there are four ways
to add it. In any way, it's better not to modify the $VIMRUNTIME/filetype.vim
file. It will be overwritten when installing a new version of Vim.
A. If you want to overrule all default file type checks.
This works by writing one file for each filetype. The disadvantage is that
there can be many files. The advantage is that you can simply drop this
file in the right directory to make it work.
ftdetect
1. Create your user runtime directory. You would normally use the first
item of the 'runtimepath' option. Then create the directory "ftdetect"
inside it. Example for Unix:
:!mkdir ~/.vim
:!mkdir ~/.vim/ftdetect
2. Create a file that contains an autocommand to detect the file type.
Example:
au BufRead,BufNewFile *.mine set filetype=mine
Note that there is no "augroup" command, this has already been done
when sourcing your file. You could also use the pattern "*" and then
check the contents of the file to recognize it.
Write this file as "mine.vim" in the "ftdetect" directory in your user
runtime directory. For example, for Unix:
:w ~/.vim/ftdetect/mine.vim
3. To use the new filetype detection you must restart Vim.
The files in the "ftdetect" directory are used after all the default
checks, thus they can overrule a previously detected file type. But you
can also use :setfiletype to keep a previously detected filetype.
B. If you want to detect your file after the default file type checks.
This works like A above, but instead of setting 'filetype' unconditionally
use ":setfiletype". This will only set 'filetype' if no file type was
detected yet. Example:
au BufRead,BufNewFile *.txt setfiletype text
You can also use the already detected file type in your command. For
example, to use the file type "mypascal" when "pascal" has been detected:
au BufRead,BufNewFile * if &ft == 'pascal' | set ft=mypascal
| endif
C. If your file type can be detected by the file name.
1. Create your user runtime directory. You would normally use the first
item of the 'runtimepath' option. Example for Unix:
:!mkdir ~/.vim
2. Create a file that contains autocommands to detect the file type.
Example:
" my filetype file
if exists("did_load_filetypes")
finish
endif
augroup filetypedetect
au! BufRead,BufNewFile *.mine setfiletype mine
au! BufRead,BufNewFile *.xyz setfiletype drawing
augroup END
Write this file as "filetype.vim" in your user runtime directory. For
example, for Unix:
:w ~/.vim/filetype.vim
3. To use the new filetype detection you must restart Vim.
Your filetype.vim will be sourced before the default FileType autocommands
have been installed. Your autocommands will match first, and the
":setfiletype" command will make sure that no other autocommands will set
'filetype' after this.
new-filetype-scripts
D. If your filetype can only be detected by inspecting the contents of the
file.
1. Create your user runtime directory. You would normally use the first
item of the 'runtimepath' option. Example for Unix:
:!mkdir ~/.vim
2. Create a vim script file for doing this. Example:
if did_filetype() " filetype already set..
finish " ..don't do these checks
endif
if getline(1) =~ '^#!.*\<mine\>'
setfiletype mine
elseif getline(1) =~? '\<drawing\>'
setfiletype drawing
endif
See $VIMRUNTIME/scripts.vim for more examples.
Write this file as "scripts.vim" in your user runtime directory. For
example, for Unix:
:w ~/.vim/scripts.vim
3. The detection will work right away, no need to restart Vim.
Your scripts.vim is loaded before the default checks for file types, which
means that your rules override the default rules in
$VIMRUNTIME/scripts.vim.
remove-filetype
If a file type is detected that is wrong for you, install a filetype.vim or
scripts.vim to catch it (see above). You can set 'filetype' to a non-existing
name to avoid that it will be set later anyway:
:set filetype=ignored
If you are setting up a system with many users, and you don't want each user
to add/remove the same filetypes, consider writing the filetype.vim and
scripts.vim files in a runtime directory that is used for everybody. Check
the 'runtimepath' for a directory to use. If there isn't one, set
'runtimepath' in the system-vimrc. Be careful to keep the default
directories!
autocmd-osfiletypes
NOTE: this code is currently disabled, as the RISC OS implementation was
removed. In the future this will use the 'filetype' option.
On operating systems which support storing a file type with the file, you can
specify that an autocommand should only be executed if the file is of a
certain type.
The actual type checking depends on which platform you are running Vim
on; see your system's documentation for details.
To use osfiletype checking in an autocommand you should put a list of types to
match in angle brackets in place of a pattern, like this:
:au BufRead *.html,<&faf;HTML> runtime! syntax/html.vim
This will match:
- Any file whose name ends in ".html"
- Any file whose type is "&faf" or "HTML", where the meaning of these types
depends on which version of Vim you are using.
Unknown types are considered NOT to match.
You can also specify a type and a pattern at the same time (in which case they
must both match):
:au BufRead <&fff>diff*
This will match files of type "&fff" whose names start with "diff".
plugin-details
The "plugin" directory can be in any of the directories in the 'runtimepath'
option. All of these directories will be searched for plugins and they are
all loaded. For example, if this command:
set runtimepath
produces this output:
runtimepath=/etc/vim,~/.vim,/usr/local/share/vim/vim82
then Vim will load all plugins in these directories and below:
/etc/vim/plugin/
~/.vim/plugin/
/usr/local/share/vim/vim82/plugin/
Note that the last one is the value of $VIMRUNTIME which has been expanded.
Note that when using a plugin manager or packages many directories will be
added to 'runtimepath'. These plugins each require their own directory, don't
put them directly in ~/.vim/plugin.
What if it looks like your plugin is not being loaded? You can find out what
happens when Vim starts up by using the -V argument:
vim -V2
You will see a lot of messages, in between them is a remark about loading the
plugins. It starts with:
Searching for "plugin/**/*.vim" in
There you can see where Vim looks for your plugin scripts.
==============================================================================
2. Filetype plugin filetype-plugins
When loading filetype plugins has been enabled :filetype-plugin-on, options
will be set and mappings defined. These are all local to the buffer, they
will not be used for other files.
Defining mappings for a filetype may get in the way of the mappings you
define yourself. There are a few ways to avoid this:
1. Set the "maplocalleader" variable to the key sequence you want the mappings
to start with. Example:
:let maplocalleader = ","
All mappings will then start with a comma instead of the default, which
is a backslash. Also see <LocalLeader>.
2. Define your own mapping. Example:
:map ,p <Plug>MailQuote
You need to check the description of the plugin file below for the
functionality it offers and the string to map to.
You need to define your own mapping before the plugin is loaded (before
editing a file of that type). The plugin will then skip installing the
default mapping.
no_mail_maps g:no_mail_maps
3. Disable defining mappings for a specific filetype by setting a variable,
which contains the name of the filetype. For the "mail" filetype this
would be:
:let no_mail_maps = 1
no_plugin_maps g:no_plugin_maps
4. Disable defining mappings for all filetypes by setting a variable:
:let no_plugin_maps = 1
ftplugin-overrule
If a global filetype plugin does not do exactly what you want, there are three
ways to change this:
1. Add a few settings.
You must create a new filetype plugin in a directory early in
'runtimepath'. For Unix, for example you could use this file:
vim ~/.vim/ftplugin/fortran.vim
You can set those settings and mappings that you would like to add. Note
that the global plugin will be loaded after this, it may overrule the
settings that you do here. If this is the case, you need to use one of the
following two methods.
2. Make a copy of the plugin and change it.
You must put the copy in a directory early in 'runtimepath'. For Unix, for
example, you could do this:
cp $VIMRUNTIME/ftplugin/fortran.vim ~/.vim/ftplugin/fortran.vim
Then you can edit the copied file to your liking. Since the b:did_ftplugin
variable will be set, the global plugin will not be loaded.
A disadvantage of this method is that when the distributed plugin gets
improved, you will have to copy and modify it again.
3. Overrule the settings after loading the global plugin.
You must create a new filetype plugin in a directory from the end of
'runtimepath'. For Unix, for example, you could use this file:
vim ~/.vim/after/ftplugin/fortran.vim
In this file you can change just those settings that you want to change.
==============================================================================
3. Docs for the default filetype plugins. ftplugin-docs
plugin_exec g:plugin_exec
Enable executing of external commands. This was done historically for e.g.
the perl filetype plugin (and a few others) to set the search path.
Disabled by default for security reasons:
:let g:plugin_exec = 1
It is also possible to enable this only for certain filetypes:
:let g:<filetype>_exec = 1
So to enable this only for ruby, set the following variable:
:let g:ruby_exec = 1
If both, the global plugin_exec and the <filetype>_exec specific variable
are set, the filetype specific variable should have precedent.
ASCIIDOC ft-asciidoc-plugin
To enable folding use this:
let g:asciidoc_folding = 1
To disable nesting of folded headers use this:
let g:asciidoc_foldnested = 0
To disable folding everything under the title use this:
let asciidoc_fold_under_title = 0
ARDUINO ft-arduino-plugin
By default the following options are set, in accordance with the default
settings of Arduino IDE:
setlocal expandtab tabstop=2 softtabstop=2 shiftwidth=2
To disable this behavior, set the following variable in your vimrc:
let g:arduino_recommended_style = 0
AWK ft-awk-plugin
Support for features specific to GNU Awk, like @include, can be enabled by
setting:
:let g:awk_is_gawk = 1
CHANGELOG ft-changelog-plugin
Allows for easy entrance of Changelog entries in Changelog files. There are
some commands, mappings, and variables worth exploring:
Options:
'comments' is made empty to not mess up formatting.
'textwidth' is set to 78, which is standard.
'formatoptions' the 't' flag is added to wrap when inserting text.
Commands:
NewChangelogEntry Adds a new Changelog entry in an intelligent fashion
(see below).
Local mappings:
<Leader>o Starts a new Changelog entry in an equally intelligent
fashion (see below).
Global mappings:
NOTE: The global mappings are accessed by sourcing the
ftplugin/changelog.vim file first, e.g. with
runtime ftplugin/changelog.vim
in your .vimrc.
<Leader>o Switches to the ChangeLog buffer opened for the
current directory, or opens it in a new buffer if it
exists in the current directory. Then it does the
same as the local <Leader>o described above.
Variables:
g:changelog_timeformat Deprecated; use g:changelog_dateformat instead.
g:changelog_dateformat The date (and time) format used in ChangeLog entries.
The format accepted is the same as for the
strftime() function.
The default is "%Y-%m-%d" which is the standard format
for many ChangeLog layouts.
g:changelog_username The name and email address of the user.
The default is deduced from environment variables and
system files. It searches /etc/passwd for the comment
part of the current user, which informally contains
the real name of the user up to the first separating
comma. then it checks the $NAME environment variable
and finally runs whoami and hostname to build an
email address. The final form is
Full Name <user@host>
g:changelog_new_date_format
The format to use when creating a new date-entry.
The following table describes special tokens in the
string:
%% insert a single '%' character
%d insert the date from above
%u insert the user from above
%p insert result of b:changelog_entry_prefix
%c where to position cursor when done
The default is "%d %u\n\n\t* %p%c\n\n", which produces
something like (| is where cursor will be, unless at
the start of the line where it denotes the beginning
of the line)
|2003-01-14 Full Name <user@host>
|
| * prefix|
g:changelog_new_entry_format
The format used when creating a new entry.
The following table describes special tokens in the
string:
%p insert result of b:changelog_entry_prefix
%c where to position cursor when done
The default is "\t*%c", which produces something
similar to
| * prefix|
g:changelog_date_entry_search
The search pattern to use when searching for a
date-entry.
The same tokens that can be used for
g:changelog_new_date_format can be used here as well.
The default is '^\s*%d\_s*%u' which finds lines
matching the form
|2003-01-14 Full Name <user@host>
and some similar formats.
g:changelog_date_end_entry_search
The search pattern to use when searching for the end
of a date-entry.
The same tokens that can be used for
g:changelog_new_date_format can be used here as well.
The default is '^\s*$' which finds lines that contain
only whitespace or are completely empty.
b:changelog_name b:changelog_name
Name of the ChangeLog file to look for.
The default is 'ChangeLog'.
b:changelog_path
Path of the ChangeLog to use for the current buffer.
The default is empty, thus looking for a file named
b:changelog_name in the same directory as the
current buffer. If not found, the parent directory of
the current buffer is searched. This continues
recursively until a file is found or there are no more
parent directories to search.
b:changelog_entry_prefix
Name of a function to call to generate a prefix to a
new entry. This function takes no arguments and
should return a string containing the prefix.
Returning an empty prefix is fine.
The default generates the shortest path between the
ChangeLog's pathname and the current buffers pathname.
In the future, it will also be possible to use other
variable contexts for this variable, for example, g:.
The Changelog entries are inserted where they add the least amount of text.
After figuring out the current date and user, the file is searched for an
entry beginning with the current date and user and if found adds another item
under it. If not found, a new entry and item is prepended to the beginning of
the Changelog.
FORTRAN ft-fortran-plugin
Options:
'expandtab' is switched on to avoid tabs as required by the Fortran
standards unless the user has set fortran_have_tabs in .vimrc.
'textwidth' is set to 80 for fixed source format whereas it is set to 132
for free source format. Setting the fortran_extended_line_length
variable increases the width to 132 for fixed source format.
'formatoptions' is set to break code and comment lines and to preserve long
lines. You can format comments with gq.
For further discussion of fortran_have_tabs and the method used for the
detection of source format see ft-fortran-syntax.
FREEBASIC ft-freebasic-plugin
This plugin aims to treat the four FreeBASIC dialects, "fb", "qb", "fblite"
and "deprecated", as distinct languages.
The dialect will be set to the first name found in g:freebasic_forcelang, any
#lang directive or $lang metacommand in the file being edited, or finally
g:freebasic_lang. These global variables conceptually map to the fbc options
-forcelang and -lang. If no dialect is explicitly specified "fb" will be
used.
For example, to set the dialect to a default of "fblite" but still allow for
any #lang directive overrides, use the following command:
let g:freebasic_lang = "fblite"
GDSCRIPT ft-gdscript-plugin
By default the following options are set, based on Godot official docs:
setlocal noexpandtab softtabstop=0 shiftwidth=0
To disable this behavior, set the following variable in your vimrc:
let g:gdscript_recommended_style = 0
GIT COMMIT ft-gitcommit-plugin
One command, :DiffGitCached, is provided to show a diff of the current commit
in the preview window. It is equivalent to calling "git diff --cached" plus
any arguments given to the command.
GO ft-go-plugin
By default the following options are set, based on Golang official docs:
setlocal noexpandtab softtabstop=0 shiftwidth=0
To disable this behavior, set the following variable in your vimrc:
let g:go_recommended_style = 0
GPROF ft-gprof-plugin
The gprof filetype plugin defines a mapping <C-]> to jump from a function
entry in the gprof flat profile or from a function entry in the call graph
to the details of that function in the call graph.
The mapping can be disabled with:
let g:no_gprof_maps = 1
HARE ft-hare
Since the text for this plugin is rather long it has been put in a separate
file: ft_hare.txt.
IDRIS2 ft-idris2-plugin
By default the following options are set:
setlocal shiftwidth=2 tabstop=2 expandtab
setlocal comments=s1:{-,mb:-,ex:-},:\|\|\|,:--
setlocal commentstring=--\ %s
setlocal wildignore+=*.ibc
To use tabs instead of spaces for indentation, set the following variable
in your vimrc:
let g:idris2#allow_tabchar = 1
JAVA ft-java-plugin
Whenever the variable "g:ftplugin_java_source_path" is defined and its value
is a filename whose extension is either ".jar" or ".zip", e.g.:
let g:ftplugin_java_source_path = '/path/to/src.jar'
let g:ftplugin_java_source_path = '/path/to/src.zip'
and the zip plugin has already been sourced, the gf command can be used to
open the archive and the n command can be used to look for the selected type
and the <Return> key can be used to load a listed file.
Note that the effect of using the "gf" command WITHIN a buffer loaded with the
Zip plugin depends on the version of the Zip plugin. For the Zip plugin
versions that do not support Jar type archives, consider creating symbolic
links with the ".zip" extension for each Jar archive of interest and assigning
any such file to the variable from now on.
Otherwise, for the defined variable "g:ftplugin_java_source_path", the local
value of the 'path' option will be further modified by prefixing the value of
the variable, e.g.:
let g:ftplugin_java_source_path = $JDK_SRC_PATH
let &l:path = g:ftplugin_java_source_path . ',' . &l:path
and the "gf" command can be used on a fully-qualified type to look for a file
in the "path" and to try to load it.
Remember to manually trigger the FileType event from a buffer with a Java
file loaded in it each time after assigning a new value to the variable:
doautocmd FileType
Markdown documentation comments may contain common runs of vertical leading
whitespace following the comment marks (`///`) for aesthetic reasons; however,
some horizontal runs of leading whitespace are significant in Markdown because
they denote code blocks etc. For convenience, a 'formatexpr' function is
provided for the gq operator. As long as neither "g:java_ignore_javadoc"
nor "g:java_ignore_markdown" is defined, the reformatting of Markdown comments
can be enabled on demand with:
setlocal formatexpr=g:javaformat#RemoveCommonMarkdownWhitespace()
Or for Vim versions less than 7.4.265, with:
setlocal formatexpr=javaformat#RemoveCommonMarkdownWhitespace()
This function accepts a range of lines, removes a common run of vertical
leading whitespace, and rewrites the lines of the range. Depending on the
author's layout style and the comment contents, which lines to select for
reformatting can vary from the whole comment to only some portion of it.
To enable the recognition of Markdown comments each time after removing
"g:java_ignore_markdown" or "g:java_ignore_javadoc", remember to manually
re-source "javaformat.vim" for Vim versions greater than 8.2.1397:
runtime autoload/javaformat.vim
JSON-FORMAT ft-json-plugin
JSON filetype can be extended to use 'formatexpr' and "json.FormatExpr()"
function for json formatting (using gq).
Add following lines to $HOME/.vim/ftplugin/json.vim:
vim9script
import autoload 'dist/json.vim'
setl formatexpr=json.FormatExpr()
LUA ft-lua-plugin
You can enable folding of Lua functions using fold-expr by:
let g:lua_folding = 1
MAIL ft-mail-plugin
Options:
'modeline' is switched off to avoid the danger of trojan horses, and to
avoid that a Subject line with "Vim:" in it will cause an
error message.
'textwidth' is set to 72. This is often recommended for e-mail.
'formatoptions' is set to break text lines and to repeat the comment leader
in new lines, so that a leading ">" for quotes is repeated.
You can also format quoted text with gq.
Local mappings:
<LocalLeader>q or \\MailQuote
Quotes the text selected in Visual mode, or from the cursor position
to the end of the file in Normal mode. This means "> " is inserted in
each line.
MAN ft-man-plugin :Man man.vim
This plugin displays a manual page in a nice way. See find-manpage in the
user manual for more information.
To start using the :Man command before any manual page has been loaded,
source this script from your startup vimrc file:
runtime ftplugin/man.vim
Options:
'iskeyword' The '.' character is added to support the use of CTRL-] on the
manual page name.
Commands:
Man {name} Display the manual page for {name} in a window.
Man {number} {name}
Display the manual page for {name} in a section {number}.
Global mapping:
<Leader>K Displays the manual page for the word under the cursor.
<Plug>ManPreGetPage
idem, allows for using a mapping:
nmap <F1> <Plug>ManPreGetPage
Local mappings:
<Plug>ManBS
<LocalLeader>h Clear backspace <BS> characters from the buffer.
CTRL-] Jump to the manual page for the word under the cursor.
CTRL-T Jump back to the previous manual page.
The mappings can be disabled with:
let g:no_man_maps = 1
To use a vertical split instead of horizontal:
let g:ft_man_open_mode = 'vert'
To use a new tab:
let g:ft_man_open_mode = 'tab'
To enable folding, use this:
let g:ft_man_folding_enable = 1
If you do not like the default folding, use an autocommand to add your
desired folding style instead. For example:
autocmd FileType man setlocal foldmethod=indent foldenable
If you would like :Man {number} {name} to behave like man {number} {name} by
not running man {name} if no page is found, then use this:
let g:ft_man_no_sect_fallback = 1
You may also want to set 'keywordprg' to make the K command open a manual
page in a Vim window:
set keywordprg=:Man
MANPAGER
The :Man command allows you to turn Vim into a manpager (that syntax
highlights manpages and follows linked manpages on hitting CTRL-]).
For bash,zsh,ksh or dash, add to the config file (.bashrc,.zshrc, ...)
export MANPAGER="vim +MANPAGER --not-a-term -"
For (t)csh, add to the config file
setenv MANPAGER "vim +MANPAGER --not-a-term -"
For fish, add to the config file
set -x MANPAGER "vim +MANPAGER --not-a-term -"
MARKDOWN ft-markdown-plugin
To enable folding use this:
let g:markdown_folding = 1
'expandtab' will be set by default. If you do not want that use this:
let g:markdown_recommended_style = 0
ORG ft-org-plugin
To enable folding use this:
let g:org_folding = 1
PDF ft-pdf-plugin
Two maps, <C-]> and <C-T>, are provided to simulate a tag stack for navigating
the PDF. The following are treated as tags:
- The byte offset after "startxref" to the xref table
- The byte offset after the /Prev key in the trailer to an earlier xref table
- A line of the form "0123456789 00000 n" in the xref table
- An object reference like "1 0 R" anywhere in the PDF
These maps can be disabled with
:let g:no_pdf_maps = 1
PYTHON ft-python-plugin PEP8
By default the following options are set, in accordance with PEP8:
setlocal expandtab shiftwidth=4 softtabstop=4 tabstop=8
To disable this behavior, set the following variable in your vimrc:
let g:python_recommended_style = 0
QF QUICKFIX qf.vim ft-qf-plugin
The "qf" filetype is used for the quickfix window, see quickfix-window.
The quickfix filetype plugin includes configuration for displaying the command
that produced the quickfix list in the status-line. To disable this setting,
configure as follows:
:let g:qf_disable_statusline = 1
R MARKDOWN ft-rmd-plugin
By default ftplugin/html.vim is not sourced. If you want it sourced, add to
your vimrc:
let rmd_include_html = 1
The 'formatexpr' option is set dynamically with different values for R code
and for Markdown code. If you prefer that 'formatexpr' is not set, add to your
vimrc:
let rmd_dynamic_comments = 0
R RESTRUCTURED TEXT ft-rrst-plugin
The 'formatexpr' option is set dynamically with different values for R code
and for ReStructured text. If you prefer that 'formatexpr' is not set, add to
your vimrc:
let rrst_dynamic_comments = 0
RESTRUCTUREDTEXT ft-rst-plugin
The following formatting setting are optionally available:
setlocal expandtab shiftwidth=3 softtabstop=3 tabstop=8
To enable this behavior, set the following variable in your vimrc:
let g:rst_style = 1
RNOWEB ft-rnoweb-plugin
The 'formatexpr' option is set dynamically with different values for R code
and for LaTeX code. If you prefer that 'formatexpr' is not set, add to your
vimrc:
let rnw_dynamic_comments = 0
RPM SPEC ft-spec-plugin
Since the text for this plugin is rather long it has been put in a separate
file: pi_spec.txt.
RUST ft-rust
Since the text for this plugin is rather long it has been put in a separate
file: ft_rust.txt.
SQL ft-sql
Since the text for this plugin is rather long it has been put in a separate
file: ft_sql.txt.
TEX ft-tex-plugin g:tex_flavor
If the first line of a *.tex file has the form
%&<format>
then this determined the file type: plaintex (for plain TeX), context (for
ConTeXt), or tex (for LaTeX). Otherwise, the file is searched for keywords to
choose context or tex. If no keywords are found, it defaults to plaintex.
You can change the default by defining the variable g:tex_flavor to the format
(not the file type) you use most. Use one of these:
let g:tex_flavor = "plain"
let g:tex_flavor = "context"
let g:tex_flavor = "latex"
Currently no other formats are recognized.
TYPST ft-typst-plugin
g:typst_conceal
When TRUE the Typst filetype plugin will set the 'conceallevel' option to 2.
g:typst_folding
When TRUE the Typst filetype plugin will fold headings. (default: FALSE)
To enable:
let g:typst_folding = 1
g:typst_foldnested
When TRUE the Typst filetype plugin will fold nested heading under their
parents. (default: TRUE)
To disable:
let g:typst_foldnested = 0
VIM ft-vim-plugin
The Vim filetype plugin defines mappings to move to the start and end of
functions with [[ and ]]. Move around comments with ]" and [".
The mappings can be disabled with:
let g:no_vim_maps = 1
ZIG ft-zig-plugin
g:zig_recommended_style
By default the following indentation options are set, in accordance with Zig's
recommended style (https://ziglang.org/documentation/master/):
setlocal expandtab shiftwidth=4 softtabstop=4 tabstop=8
To disable this behavior, set g:zig_recommended_style to 0:
let g:zig_recommended_style = 0
g:zig_std_dir
The path to the Zig standard library. The Zig ftplugin reads g:zig_std_dir
and appends it to the 'path' for Zig files. Where the Zig standard library
is located is system and installation method dependent.
One can automatically set g:zig_std_dir using `zig env`:
let g:zig_std_dir = json_decode(system('zig env'))['std_dir']
This can, for example, be put in a FileType :autocmd or user ftplugin to
only load when a Zig file is opened.
ZIMBU ft-zimbu-plugin
The Zimbu filetype plugin defines mappings to move to the start and end of
functions with [[ and ]].
The mappings can be disabled with:
let g:no_zimbu_maps = 1
vim:tw=78:ts=8:noet:ft=help:norl: